Illustrator Draftsman 3 & 2 - Volume 2 Standard Practices and Theory

Chapter 1 Composition
Acronyms - 14276_12
Preliminary Information
Thumbnail Sketches - 14276_14
CompositionalElements
Relative figural size
Compositional Elements, Cont.
Picture depth or perspective
Line movement
Line movement
Value - 14276_21
Value (Continued) - 14276_22
Value (Continued) - 14276_23
Value (Continued) - 14276_24
Texture used to imply imagery
Value (Continued) - 14276_26
Proportion
Balance
Balance (Continued) - 14276_29
Balance (Continued) - 14276_30
Balance-cont.
Unity
Clarity
PictorialCompositions
Proportion in pictorial compositions
Figures
Props - 14276_37
Borders
PhotographicCompositions
Subject placement-Cont.
Viewpoint and camera angle
Viewpoint and camera angle-Cont. - 14276_42
Viewpoint and camera angle-Cont. - 14276_43
Viewpoint and camera angle-Cont. - 14276_44
Textural Compositions
textural Compositions-Cont. - 14276_46
Textural Compositions-Cont. - 14276_47
Textural Compositions-Cont. - 14276_48
Textural Compositions, Cont
Final size
Proportion (Continued)
Thumbnail sketches - 14276_52
Comprehensive layouts
Overlays - 14276_54
BlueprintCompositions
Standards (Continued)
Sheet sizes
Margins - 14276_58
Title block
Reference numbers
Scale
Revision blocks
Bill of materials
Station numbers
Finish marks - 14276_65
Summary - 14276_66
Chapter 2 Geometric Construction
Acronyms - 14276_68
Definition of Terms
Points and lines-Cont.
Angles - 14276_71
Triangles - 14276_72
Quadrilaterals
Polygons
Circles
Circles-Cont. - 14276_76
Circles-Cont. - 14276_77
Solids
Solids-Cont. - 14276_79
Solids-Cont. - 14276_80
Solids-Cont. - 14276_81
Solids-Cont. - 14276_82
Solids-Cont
Ellipsoids
Bisection
Bisecting angles
Division
An alternate method of dividing lines
Dividing lines proportionately
An alternate method of proportionally dividing lines into parts
Transference
Transferring triangles
Tangency
To draw a line tangent to a circle through a point
To draw tangents to two circles
Drawing an arc tangent to a right angle
Tangent arcs for acute and obtuse angles
To draw an arc tangent to two arcs
PolygonalConstruction
Polygonal Construction-Cont.
Angles - 14276_101
The sine method of angle construction
The chord method of angle construction
Triangles - 14276_104
Triangles-Cont. - 14276_105
Triangles-Cont. - 14276_106
Squares
Squares-Cont.
The pentagon
Polygons composed of five or more sides-Cont.
Ellipse Construction
Determining foci
Foci method
Foci method-Cont.
The trammel method
Concentric diameters method
Conjugate diameter method-Cont.
Conjugate diameter method
Parallelogram ellipses
Involutes
Involute of a triangle
Involute of a square
Comments - 14276_123
Chapter 3 General Drafting Practices
Acronyms - 14276_126
Overview-Cont. - 14276_127
DraftingDefinitions
Drafting Standards
Drafting Techniques
Pencil drawings-Cont.
Drawing aids - 14276_132
Inking techniques
Inking order
Inking order-Cont.
Erasing in ink
Line Conventions - 14276_137
Visible lines
Hidden lines
Hidden lines-Cont.
Extension lines
Dimension lines
Dimension lines-Cont.
Arrowheads
Break lines
Phantom or datum lines
Viewing and cutting plane lines.
Viewing or cutting plane lines-Cont.
Chart of line conventions
Line conventions (continued)
Dimensioning
Dimension figures
Dimension techniques
Diameters
Radii
Rounded ends
Dimensioning rounded corners
Rounded holes
Slotted holes
Counterbored holes
Dimensioning countersunk and counterdrilled holes
Spot-facing
Chamfers
Tolerances
Allowance
Indicating tolerance
Fit
Basic hole system
Basic shaft system
Views
Choice of views
Choice of views-Cont.
Auxiliary views
Auxiliary views-Cont
Exploded views
Revolutions
Revolutions-Cont. - 14276_177
Revolutions-Cont. - 14276_178
Revolutions-Cont. - 14276_179
Sectional views
Full sections
Half sections
Broken-out sections
Revolved sections
Removed sections
Offset sections
Partial views - 14276_187
Conventional breaks
Conventional break lines
Correct and incorrect lines in a sectional view
Section lining
Drawing section lines
Summary - 14276_193
Chapter 4 Technical Drawings
Acronyms - 14276_196
Acronyms-Cont. - 14276_197
Technical Drawings and Sketches
Scale.
Sharpening a pencil.
Sketching straight lines
Sketching arcs,circles, and ellipses
Drawing ellipses
Architectural/Structural Steel Drawings
The profile of a channel
The profile of a tee
Members
Shape symbols
Vertical members
Horizontal members
Trusses
Welding symbology
Welding symbology-Cont. - 14276_213
Welding symbology-Cont. - 14276_214
Rivet symbology
Drawing steel structures
Construction drawings
Construction drawings (Continued) - 14276_218
Construction drawings (Continued) - 14276_219
Construction drawings (Continued) - 14276_220
Electrical/Electronic Drawings
Numbering electrical units
Cable markings
Cable markings (Continued)
Isometric wiring diagrams (shipboard)
Aircraft electrical prints - 14276_226
Aircraft wire identification coding (Continued)
Electronic prints
Reference designations
Logic diagrams
Logic diagrams-Cont.
basic logic diagram
Detailed logic diagrams
Machine Drawings
Gerneral terms (Continued)
General terms-Cont. - 14276_236
General terms-Cont. - 14276_237
General terms-Cont. - 14276_238
General terms-Cont. - 14276_239
General terms To save time, use symbols thGeneral terms(Continued)
General terms-Cont. - 14276_241
Screw thread terminology
General terms-Cont. - 14276_243
General terms-Cont. - 14276_244
General terms-Cont. - 14276_245
Proportions for a basic finish mark
Placing finish marks
Typical examples of symbol use
Orthographic pipe drawings
Methods of projection (Continued)
Crossing pipes
Fittings - 14276_252
Reading fittings
Common pipe line symbols
Common piping symbols
Common piping symbols (continued)
Common plumbing symbols
Color codes
Aircraft fluid line color codes and symbols
Fluid power symbols
Shipboard piping prints - 14276_261
Summary - 14276_262
Chapter 5 Perspectiveprojections
Acronyms - 14276_264
Perspective - 14276_265
The cone of visual rays.
General principles of perspective (Continued) - 14276_267
General principles of perspective (Continued) - 14276_268
General principles of perspective (Continued) - 14276_269
General principles of perspective (Continued) - 14276_270
General principles of perspective (Continued) - 14276_271
Linear Perspective
Reverse Perspective
Aerial Perspective
One-Point Perspective
Two-Point Perspective
Two-Point Perspective, Cont.
Three-Point Perspective
Perspective Practices
Plan-view method in one- point perspective (Continued) - 14276_280
Plan-view method in one- point perspective (Continued) - 14276_281
Plan view method in two- point perspective
The plan-view method of two-point perspective
Measuring-line method of perspective projection
Measuring-line method of perspective projection-Cont.
Distortion
Inclined lines and planes
Inclined lines and planes-Cont.
Curves and circles in perspective
Curves and circles in perspective (Continued) - 14276_290
Curves and circles in perspective (Continued) - 14276_291
Dividing a receding plane or surface into equal parts
Dividing lines or receding area into parts in perspective-Cont. - 14276_293
Dividing lines or receding area into parts in perspective-Cont. - 14276_294
Reflections in perspective
Reflections, shadows, and shade in perspective (Continued) - 14276_296
Reflections, shadows, and shade in perspective (Continued) - 14276_297
Reflections, shadows, and shade in perspective (Continued) - 14276_298
Comments - 14276_299
Chapter 6 Parallel Projections
Acronyms - 14276_302
Parallel Projections
ObliqueProjections
Selecting a surface
Receding lines
Cavalier projections
Cabinet projection
Circles, arcs, and ellipses - 14276_309
Circles,arcs, and ellipse-Cont. - 14276_310
Circles,arcs, and ellipse-Cont. - 14276_311
Offset measurements
Angles - 14276_313
Oblique dimensioning
OrthographicProjections
axonometric projection
Isometric projections
Isometric scale
Isometric scale-Cont.
Position of the isometric axes
Circles, arcs, and ellipses - 14276_321
Circles, arcs, and ellipses-Cont. - 14276_322
Circles, arcs, and ellipses-Cont. - 14276_323
Sections
Isometric dimensioning
Dimetric projections
Trimetric projections
Principal views
First-angle projections
Third-angle projections
Position of the principal views
Miter lines
Miter lines-Cont.
Proper spacing of views
Choosing the necessary views
Corner point numbering
Normal and oblique lines
Normal and oblique lines-Cont.
Parallel Practices
Partial views - 14276_340
Summary - 14276_341
Appendix I Glossary
Appendix I Glossary-Cont. - 14276_344
Appendix I Glossary-Cont. - 14276_345
Appendix I Glossary-Cont. - 14276_346
Appendix I Glossary-Cont. - 14276_347
Appendix I Glossary-Cont. - 14276_348
Appendix I Glossary-Cont. - 14276_349
Appendix I Glossary-Cont. - 14276_350
Appendix I Glossary-Cont. - 14276_351
Appendix I Glossary-Cont. - 14276_352
Appendix I Glossary-Cont. - 14276_353
Appendix I Glossary-Cont. - 14276_354
Appendix I Glossary-Cont. - 14276_355
Appendix I Glossary-Cont. - 14276_356
Appendix I Glossary-Cont. - 14276_357
Appendix I Glossary-Cont. - 14276_358
Appendix I Glossary-Cont. - 14276_359
Appendix I Glossary-Cont. - 14276_360
Appendix I Glossary-Cont. - 14276_361
Appendix I Glossary-Cont. - 14276_362
Appendix I Glossary-Cont. - 14276_363
Appendix I Glossary-Cont. - 14276_364
Appendix I Glossary-Cont. - 14276_365
Appendix I Glossary-Cont. - 14276_366
Appendix I Glossary-Cont. - 14276_367
Appendix I Glossary-Cont. - 14276_368
Appendix I Glossary-Cont. - 14276_369
Appendix I Glossary-Cont. - 14276_370
Appendix I Glossary-Cont. - 14276_371
Appendix I Glossary-Cont. - 14276_372
Appendix I Glossary-Cont. - 14276_373
Appendix I Glossary-Cont. - 14276_374
Appendix I Glossary-Cont. - 14276_375
Appendix I Glossary-Cont. - 14276_376
Appendix I Glossary-Cont. - 14276_377
Appendix I Glossary-Cont. - 14276_378
Appendix I Glossary-Cont. - 14276_379
Appendix I Glossary-Cont. - 14276_380
Appendix I Glossary-Cont. - 14276_381
Appendix I Glossary-Cont. - 14276_382
Appendix I Glossary-Cont. - 14276_383
Appendix I Glossary-Cont. - 14276_384
Appendix I Glossary-Cont. - 14276_385
Appendix I Glossary-Cont. - 14276_386
Appendix I Glossary-Cont. - 14276_387
Appendix I Glossary-Cont. - 14276_388
Appendix I Glossary-Cont. - 14276_389
Appendix I Glossary-Cont. - 14276_390
Appendix I Glossary-Cont. - 14276_391
Appendix I Glossary-Cont. - 14276_392
Appendix I Glossary-Cont. - 14276_393
Appendix I Glossary-Cont. - 14276_394
Appendix I Glossary-Cont. - 14276_395
Appendix I Glossary-Cont. - 14276_396
Appendix I Glossary-Cont. - 14276_397
Appendix I Glossary-Cont. - 14276_398
Appendix I Glossary-Cont. - 14276_399
Appendix I Glossary-Cont. - 14276_400
Appendix I Glossary-Cont. - 14276_401
Appendix I Glossary-Cont. - 14276_402
Appendix I Glossary-Cont. - 14276_403
Appendix I Glossary-Cont. - 14276_404
Appendix I Glossary-Cont. - 14276_405
Appendix I Glossary-Cont. - 14276_406
Appendix I Glossary-Cont. - 14276_407
Appendix I Glossary-Cont. - 14276_408
Appendix I Glossary-Cont. - 14276_409
Appendix II Graphic Symbols for Electronic Diagrams
Appendix II Graphic Symbols for Electronic Diagrams-Cont. - 14276_412
Appendix II Graphic Symbols for Electronic Diagrams-Cont. - 14276_413
Appendix II Graphic Symbols for Electronic Diagrams-Cont. - 14276_414
Appendix III General Electrical Symbols
Appendix III General Electrical Symbols-Cont.
Appendix IV General Mechanical Symbols
Appendix IV General Mechanical Symbols-Cont.
Appendix V Graphical Symbols for Aircraft Hydraulic and Pneumatic System
Appendix V Graphical Symbols for Aircraft Hydraulic and Pneumatic System-Cont. - 14276_420
Appendix V Graphical Symbols for Aircraft Hydraulic and Pneumatic System-Cont. - 14276_421
Appendix V Graphical Symbols for Aircraft Hydraulic and Pneumatic System-Cont. - 14276_422
Appendix V Graphical Symbols for Aircraft Hydraulic and Pneumatic System-Cont. - 14276_423
Appendix V Graphical Symbols for Aircraft Hydraulic and Pneumatic System-Cont. - 14276_424
Appendix V Graphical Symbols for Aircraft Hydraulic and Pneumatic System-Cont. - 14276_425
Appendix VI Trigonometric Functions
Appendix VI Trigonometric Functions-Cont. - 14276_428
Appendix VI Trigonometric Functions-Cont. - 14276_429
Appendix VI Trigonometric Functions-Cont. - 14276_430
Appendix VI Trigonometric Functions-Cont. - 14276_431
Appendix VI Trigonometric Functions-Cont. - 14276_432
Appendix VII References Used to DEvelop the Traman
Appendix VII References Used to DEvelop the Traman-Cont.
Assignment Questions - 14276_445
Assignment 1 - 14276_447
Assignment 1-Cont. - 14276_448
Assignment 1-Cont. - 14276_449
Assignment 1-Cont. - 14276_450
Assignment 1-Cont. - 14276_451
Assignment 1-Cont. - 14276_452
Assignment 2 - 14276_453
Assignment 2-Cont. - 14276_454
Assignment 2-Cont. - 14276_455
Assignment 2-Cont. - 14276_456
Assignment 2-Cont. - 14276_457
Assignment 2-Cont. - 14276_458
Assignment 3 - 14276_459
Assignment 3-Cont. - 14276_460
Assignment 3-Cont. - 14276_461
Assignment 3-Cont. - 14276_462
Assignment 3-Cont. - 14276_463
Assignment 3-Cont. - 14276_464
Assignment 3-Cont. - 14276_465
Assignment 3-Cont. - 14276_466
Assignment 4 - 14276_467
Assignment 4-Cont. - 14276_468
Assignment 4-Cont. - 14276_469
Assignment 4-Cont. - 14276_470
Assignment 4-Cont. - 14276_471
Assignment 4-Cont. - 14276_472
Assignment 5 - 14276_473
Assignment 5-Cont. - 14276_474
Assignment 5-Cont. - 14276_475
Assignment 5-Cont. - 14276_476
Assignment 5-Cont. - 14276_477
Assignment 5-Cont. - 14276_478
Assignment 5-Cont. - 14276_479
Assignment 6 - 14276_480
Assignment 6-Cont. - 14276_481
Assignment 6-Cont. - 14276_482
Assignment 6-Cont. - 14276_483
Assignment 6-Cont. - 14276_484
Assignment 6-Cont. - 14276_485
Assignment 6-Cont. - 14276_486

Privacy Statement
Press Release
Contact

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business