3-59. When drawing a revolution, you should 3-63. How much of an object does a cutting plane observe which of the following rules? line expose in a full section? 1. The revolved view always shows the axis as a point and this view does not change in size and shape 2. Where the axis is shown as a line, the dimensions parallel to the axis changes 3. Lines parallel on the object are perpendicular in the revolved view 4. The revolved view always shows the axis as a line and this view does not change in size and shape 1. All 2. Half 3. One third 4. One-quarter 3-64. To show one-quarter of an object’s interior, what sectional view should you select? 3-60. When  you  draw  revolutions  perpendicular to the front plane of projection, what causes foreshortening in the vertical dimensions? 3-65. 1. Half section 2. Full section 3. Quarter section 4. Offset section You may use a break line to expose a broken-out  section. 1. The counterclockwise rotation of the axis 2. The side surfaces being oblique to the profile plane 3. The depth dimensions appearing as true size 4. The length and width dimensions appearing in true size 1. True 2. False 3-66. How many degrees should you rotate a revolved section in a view? 3-61. The axis of revolution appears as a point in the side view when you revolve the view in what  fashion? 1. 180° 2. 90° 3. 45° 4. 30° 1. Parallel to the front plane of projection 2. Perpendicular to the auxiliary view 3. Perpendicular to the profile plane of projection 3-67. How should you show a removed section of a drawing? 4. Parallel to the top plane of projection 3-62. What term identifies a line that indicates a plane which results in a sectional view? 1. On a centerline extended from a section cut 2. Aligned to the closest end of the object 3. Revolved and overlapped over the object outline 4. Aligned with a side view 1.    Object  outline 2. Cutting plane line 3. Viewing plane line 4. Break line 3-68. Bending the cutting plane line to show asymmetrical internal features results in what type of section? 1. A revolved section 2. A broken-out section 3. A removed section 4. An offset section 19