2-35.
Which of the following is a feature
2-27.
What is the purpose of a steel
straightedge?
1.
To cut straight lines
2.
To draw straight lines
3.
To tear paper
4.
To weigh down paper
2-28.
Why should you store drafting
instruments in their original case?
1.
To present a neat and orderly
appearance
2.
To have a place to put them in
3.
To protect the instruments from
corroding
4.
To keep the instruments out of
sight
2-29.
What is the purpose of proportional
dividers?
2-30
2-31.
1.
To draw circles
2.
To transfer measurements
3.
To step off equal distances
4.
To transfer irregular curves
What is the purpose of a set of
dividers?
1.
To transfer irregular curves
2.
To step off equal distances
3.
To divide arcs and circles
4.
To draw circles
What is the purpose of a compass?
1.
To draw arcs and circles
2.
To draw irregular curves
3.
To divide arcs and circles
4.
To step off equal distances
2-32.
What distance beyond the leg of the
compass or divider should the
needlepoint project?
1.
1/64 inch
2.
1/32 inch
3.
3/64 inch
4.
1/8 inch
2-33.
What drawing instrument should you
select to draw a circle exceeding
64 inches in diameter?
1.
A standard compass with an
extension
2.
A hollow compass
3.
A beam compass
4.
A drop bow
2-34.
What drafting instrument should you
select to draw a circle 1/8 inch in
diameter?
1.
A set of bow dividers
2.
A drop bow pen
3.
A compass
4.
A bow pen
2-36.
2-37.
2-38.
2-39.
2-40.
2-41.
of the Swede pen?
1.
Broad nibs
2.
Parallel nibs
3.
Extremely curved nibs
4.
Hollow handle on a swivel base
The contour pen is best suited for
what purpose?
1.
To create straight lines
2.
To use greater ink capacity
3.
To create freehand, curvilinear
lines
4.
To create parallel lines of
equal or differing width
Which pen should you select to draw
parallel lines of equal or
differing widths?
1.
Swede pen
2.
Detail pen
3.
Contour pen
4.
Railroad pen
Needlepoints for compasses and
dividers are available in which of
the following shapes?
1.
Blunt
2.
Tapered
3.
Shouldered
4.
Tapered and shouldered
What is the purpose of a center
disk?
1.
To stabilize the compass or
dividers
2.
To mark the center of the item
being drawn
3.
To prevent overenlarging a
compass hole
4.
To mark the center of the
circle being drawn
Exactly how far up the nib should
you fill a pen with ink?
1.
3/16 inch
2.
1/2 inch
3.
9/16 inch
4.
1 inch
Before using a new pen nib, what
should you do to the nib surface?
1.
Moisten it
2.
Oil it slightly
3.
Sand it slightly
4.
Marinate it in ink
8
