4-28.
4-29.
4-30.
4-31.
4-32.
4-33.
What type of bulb is found in most
diazo machines?
1.
Fluorescent
2.
Ultraviolet
3.
Incandescent
4.
Mercury vapor
The best image possible from a
diazo machine occurs when the
master and the material enter the
feed assembly in what fashion?
1.
Emulsion side up
2.
Emulsion side down
3.
Emulsion to emulsion
4.
Emulsion against the feedboard
Why must you carefully handle paper
or film when you load a
phototypesetting machine?
1.
To avoid chemical contamination
by your hands
2.
To avoid chemical contamination
to your hands
3.
To avoid spilling chemical
developers
4.
To avoid damage to the soft
emulsion
To make sure the phototypesetter
operates well, which maintenance
step should you perform daily?
1.
Rinse the roller assembly and
trays
2.
Oil all bearings with No. 10
lube oil
3.
Clean all mirrored surfaces
with a rag
4.
Clean all optical surfaces with
glass cleaner
What type of phototypesetter is
commonly found in Navy Graphics
shops?
1.
CRT technology
2.
Raster scan technology
3.
First-generation technology
4.
Fourth-generation technology
The term “on the fly” refers to
what type of phototypesetter
process?
1.
Fiber optics
2.
Digital memory
3.
Raster scanning
4.
Electromechanical
4-34.
4-35.
4-36.
4-37.
4-38.
4-39.
4-40.
What phototypesetter technology is
an example of fourth-generation
technology?
1.
Raster scan and fiber optics
2.
Electromechanical
3.
Cast hot type
4.
Digitization
A halftone, point, and pixel are
synonymous units of measure for
image definition.
1.
True
2.
False
What developing process is not
permanent?
1.
Stabilization
2.
Photographic
3.
Transfer
4.
Therms 1
How can you tell if the chemicals
in a phototypesetter need
replenishment?
1.
Weak images
2.
Streaked images
3.
Thin grey images
4.
Each of the above
Pressure process lettering machines
produce which kind of letter?
1.
Ghost
2.
cutout
3.
Carbon
4.
Carbon or cutout
When you use a pressure process
lettering machine that cuts letters
from a vinyl or paper tape, how do
position the raised image on the
font in the channel?
1.
Toward the tape
2.
Behind the tape
3.
Between the tape
4.
Away from the tape
What must you do to preserve the
carbon image from a pressure
process lettering machine?
1.
Burnish the tape
2.
Laminate the tape
3.
Spray the tape with fixative
4.
Spray the tape with clear spray
paint
20
